Saturday, November 18, 2017

Xiaomi XiaoFang Quick User Guide - ENGLISH Translation

小方智能摄像机快速指南手册
Small square smart camera quick guide book


THE FOLLOWING IS A TRANSLATION OF THE XIAOMI XIAOFANG CAMERA'S USER GUIDE, DONE USING GOOGLE TRANSLATE. I MAKE NO GUARANTEE TO THE ACCURACY.

PAGE1
准备
Ready
扫描二维码下载米家App
Scan two-dimensional code to download MiHome App
或将其更新至最新版本
Or update it to the latest version.
本产品己经接入小米智能家庭,
This product has access to XiaoMi smart home,
可与其他小米智能家庭产品互联互动
Interoperability with other XiaoMi smart home products.

1.接通电源后等待15秒
1.Wait 15 seconds after turning on the power
将摄像机适配器的电源连接线插入产品背部电源接口,等待15秒后开机成功,15秒后开机成功,此时状态指示灯将闪烁黄光。
The camera adapter power cable into the product back power connector, wait for 15 seconds after the boot is successful, then the status indicator will blink yellow.

闪烁黄光-如状态指示灯非黄光闪烁,请芸试断开电源等待5秒后重新接通电源。请务必使用标配电源适配器和连接线,使用其他适配器有可能导致产品故障。
Blinking yellow - If the status indicator flashes non-yellow, please turn off the power and wait for 5 seconds before turning the power back on. Please be sure to use the standard power adapter and cable, use of other adapters may cause product failure.

PAGE2
2. 长按底部SETUP按钮3秒. 拉开摄像机底座,长按底部SETUP按钮3秒,当听到“等待连接”语音提示后重置成功。
Press and hold the SETUP button for 3 seconds Press the SETUP button on the bottom of the camera for 3 seconds, and when you hear the "Wait for connection" voice prompt, the reset is successful.

3. 打开米家App按提示操作
Open MiHome App and follow the prompts.

PAGE3
产品详细介绍. 包装清单:小方摄像机x1,快速指南x1,电源适配器x1,电源连接线x1。
Product details. Packing list: XiaoFang camera x1, quick guide x1, power adapter x1, power cable x1.

光线传感器. 镜头. 麦克孔. 存储卡槽. 重置按钮SETUP
Light Sensor Lens Microphone Memory Card Slot Reset Button SETUP
电源。状态指示灯。电源连接线。电源适配器
power supply. Status Indicator. Power cable. Power Adapter

PAGE4
视频图文教程及更多精彩活动。请关注小方智能摄像机微信公众号详细了解。
Video tutorials and more exciting activities. Please pay attention to XiaoFang smart camera WeChat public number for more information.
‎打开微信“扫一扫“上方二维码关注。
‎Open WeChat "Sweep" at the top two-dimensional code attention

PAGE5
退换货登记表。非人为损坏,可享受7天无理由退货,15天换货,1年内免费维修服务。如有相关退换货需求,请用手机微信扫描下方二维码进入退换货登记表,按要求填写。
Return registration form. Non-human damage, can enjoy 7 days no reason to return, 15 days replacement, 1 year free maintenance services. If you have the demand for return, please use the mobile micro-channel to scan the QR code below to enter the return registration form, fill in the required.



注意事项:

1,退换货流程:填写登记表,快递寄回小方,厂家收货后退款胰货。
2,发回运费由用户承担,换货运费由厂商承担。
3,如已开具纸质发票,请务必与小方一并寄回。
4,如有维修需求,或有其他疑问,可先拨打400-682-2602咨询。
Matters needing attention:

1, return process: fill in the registration form, courier sent back to the XiaoFang, manufacturers receive goods after the refund of pancreatic goods.
2, send back the freight borne by the user, replacement freight borne by the manufacturer.
3, If you have issued a paper invoice, be sure to send it back with the small side.
4, if the maintenance needs, or have other questions, you can call 400-682-2602 consulting.

PAGE6
小方智能摄像机保修说明。13服务内容如下:小方摄像机售后服务严格依据《中华人民共和国消费者权益保护法》,《中华人民共和国产品质量法》实行售后三包服务,服务内容如下:在三包有效期内,您可以依照本规定免费享受退货,换货,维修的服务,维修,换货,退货应当凭发票办理。

1,7日无理由退货(电商购买渠道),由用户承担物流费用;
2,本产品出现《产品性能故障表》所列性能故障的情况,经检测确定后,可以免费享受如下服务。
Xiao Fang smart camera warranty instructions. 13 Services are as follows: Squared camera service strictly in accordance with the "People's Republic of China Consumer Protection Law", "People's Republic of China Product Quality Law," the implementation of three bags of service, the service is as follows: Three bags of the validity period, you can follow The provisions of the free return, replacement, repair service, repair, replacement, return should be handled by invoice.

1, 7 no reason to return (electricity supplier to buy channels), borne by the user logistics costs;
2, the product appears "product performance fault table" listed performance failure situation, after testing to determine, you can enjoy the following services for free.

服务类型, 服务政策。。。退货。

换货。 自签收次日起7天内产品质量原因退货。
维修。 自签收次日起15天内产品质量原因换货。
退货 自签收次日起1年内产品质量原因维修。
Service type, service policy . .
Returns. Within 7 days from the next day of receipt for product quality reasons return.
Exchange. Within 15 days from the date of receipt of the product quality reasons replacement.
Service. 1 year from the day after the receipt of the product quality reasons for repair. Returns

友情提示:因运输过程中需使用包装箱保证产品运输安全,建议您自签收之日起至少保留包装箱15天丞磁力底座。请勿靠近电脑主机或硬盘。
Tips: Due to the transport process need to use the box to ensure product safety, it is recommended that you keep at least 15 days from the date of receipt of the box magnetic base. Do not stay close to your computer or hard drive.


产品性能故障表。
服务类型。 性能故障。
主机无法工作通电指示灯不亮。小方智能。无法开机。摄像机。无法通话和视频。因结构或材料因素造成的外壳裂损
Product performance fault table.

Service type. Performance problems.
Xiao Fang smart. . Camera. The host does not work power indicator light does not shine.
Can not boot
Can not talk and video.
Shell cracks due to structural or material factors



非保修条例1,未经授权的维修,误用,碰撞,疏忽,滥用,进液,事故,改动,不正确的使用非本产品配件!或撕毁,涂改标贴,防伪标记; 2,已超过三包有效期; 3,因不可抗力造成的损坏; 4,不符合《产品性能故障表》所列性能故障的情况; 5,因人为原因导致本产品及其配件产生《产品性能故障表》所列性能故障。
Non-warranty 1, unauthorized repair, misuse, collision, negligence, abuse, into the liquid, accident, alteration, incorrect use of non-product accessories! Or torn, altered labels, anti-counterfeit labels; 2, has more than three bags of validity; 3, due to force majeure caused damage; 4, does not meet the performance failure table listed in the performance failure situation; 5, Product and its accessories have a performance breakdown listed in the Product Performance Failure Matrix.

生产厂家:天津华来科技有限公司址:天津市南开区雅安道金平路10号华侨创业大厦9F。客服电话:400-682-2602。客服时间:08:30-17:30
Manufacturer: Tianjin Hualai Science and Technology Co., Ltd. Address: 9F, Overseas Chinese Venture Building, No.10 Jinping Road, Ya'an Road, Nankai District, Tianjin. Customer Service Phone: 400-682-2602. Customer service time: 08: 30-17: 30


----------------------------------------------------------

MY NOTES HERE - from here below, it is no longer translation.

The XiaoFang camera requires the XiaoMi MiJia(HOME) app to configure and connect to the network. It is convenient to also get the Xiaomi Gateway (I don't receive anything from Xiaomi for promoting this). The important point here, is these devices work with your home wireless network. So it is important, during the setup process, to ensure Wifi Security is open temporarily. For example, the home wireless network has to:
1. Enable SSID broadcasting
2. Include the Xiaomi Devices in Wireless MacID filtering list.

Wireless MacID Filtering.
How do we know what is the MacID of XiaoFang.
1. Go to wireless router and look at the list of DHCP -> DHCP client list.
2. Disable MacID Filtering.
3. Configure / Connect the XiaoFang camera.
4. Look at the DHCP client list again, and look for the new MacID. This is the MacID just added and it must be the MacID of the XiaoFang.
5. After everything else about XiaoFang is setup and connected, its MacID can be added to the MacID filtered list. Now all Wireless security can be turned on again.

11 April 2020
XiaoFang motion detection recording video setup.
- This assumes you have already setup the XiaoFang camera on the XiaoMi MiJia (XiaoMi Home) app on your mobile.
- Open the MiJia App.
- Click on the icon for the XiaoFang (there could be more than one)
- After the XiaoFang page loads, click on the three DOTs (...) on the top right of the screen.
- Click on "Camera Settings"
- Click on "Detection Alarm"
-- Motion Detection - toggle to switch on.
-- Detection Sensitivity - choose from Low, Medium, High
-- Alarm Interval - use this to set the time of day, and which days
-- Alarm Frequency - min is 3 minutes. Specifies how frequent to restart the motion detection.


XiaoFang motion detection recording video setup - where are the video files?
- This assumes you have already setup the XiaoFang camera on the XiaoMi MiJia (XiaoMi Home) app on your mobile.
- Open the MiJia App.
- Click on the icon for the XiaoFang (there could be more than one)
- After the XiaoFang page loads, click on the three DOTs (...) on the top right of the screen.
- Click on "Video Record".
- All the video files recorded by XiaoFang will be available here.


27 July 2023
- After long time of inactivity, due to change in SmartPhone, tried to connect with XiaoFang again.
- Going through the whole process leads to failure - it tries to connect and reach 100%, but fail to connect.
- To solve this
1. Re-install the app
2. Press and hold the RESET button for 15 seconds or more. This will do Factory Reset.
3. Open the App and set Region to 'Chinese Mainland'. Continue with the connection process and it works.







Thursday, November 09, 2017

Notes Xiaomi MIUI

Notes MIUI Xiaomi Mi Max2
==============================

The following are instructions based on my Xioami Mi Max2, but I suppose it can work with other Xioami running MIUI as well.


How to organize Folders as Music Playlist




How to organize Folders as Music Playlist
===========================================
With the Xiaomi Mi Max2, it does not organize or recognize folders as playlists by itself. There is no way of choosing a folder to be a playlist.
Imagine if you have 1000 songs and 25 folders. Let say, we want folder 'A' to become playlist called 'A'. It does not allow you to choose that.
The first time you use Xiaomi and browse the folders (eg with Explorer), and Xiaomi sees your songs, it will see 1000 songs.
When you go to Music app, it will see 1000 songs. You can spend a lot of time to create a Playlist, eg playlist A and manually choose songs to put in playlist A.
This takes a lot of time.

Here is the solution.
Go to the Music App, click Settings -> click Advanced Settings -> click by Folder.
Now you can CHOOSE which folder the Music app can see.
So uncheck all folders, and check only folder A.
Now Tap, Tap, Tap, .... to completely exit the Music App.

Go back into Music App again.
Click My Playlist, click '+' sign to create a new playlist and call it 'A'
Click on the new playlist A, click on 'Add to Playlist'
Now the phone will show ALL the music files, of Folder A ONLY.
Now click 'Select All' -> click OK.
So with these few click, all files in folder A is assigned to playlist A

Sunday, November 05, 2017

Notes Altcoins Mining

NotesCryptocoin

NotesCryptocoin

This is a collection of links of the resources needed in mining Cryptocoins / Altcoins of which Bitcoin is the most famous. At the time of writing, most people in this field know that Bitcoin mining for the home user is no longer a worthwhile exercise. So the focus is more general here, about mining other crypto coins.

Contents

Coin Markets

Overview of what's needed

Exchange API

Dogecoin

Musiccoin

Ethereum

Coin Markets

https://whattomine.com/

https://coinmarketcap.com/currencies/

https://www.cryptocompare.com

Overview of what's needed

Digital Wallet

This is where your crypto-coin (ccoin) is stored. Exchanges can store the coins, but it is believed to be more secured if you store it yourself. Some types of digital wallet are:

  • Software - includes Desktop / Mobile / Web-based - eg Bitcoin Core, Xapo, Mycelium. (see bitcoin.org/en/wallets/mobile/android). Exodus, Jaxx for Desktop Windows
  • Hardware - stored offline on a device - eg Trezor, KeepKey

See Also:

Exchanges / Trading Platform

Extensive list of exchanges found in: https://www.finder.com.au/exodus-wallet-review

This is needed to buy/sell ccoins. Examples are:

BTC Markets (https://www.btcmarkets.net/home)- trades in the following pairs as of 28Dec2017

  • AUD<->{BTC/LTC/ETH/ETC/XRP/BCH}
  • BTC<->{LTC/ETH/ETC/XRP/BCH}

Deposit Bpay-Free Poli$3.30 Withdraw Bank Transfer Free.

CoinJar (https://www.coinjar.com.au/trade) - trade between BTC and AUD/USD/GBP/EUR Fees Trading-1%, Deposit BPay-Poli-Free. Bitcoin only X

Cryptopia (https://www.cryptopia.co.nz/Exchange) - "Deposit, trade, and withdraw Bitcoin, Litecoin, and over 400 other crypto currencies." 0.2%

Bitcoin Australia (https://bitcoin.com.au/) Fees 5%, Buy/Sell, Bitcoin only X

CoinSpot (https://www.coinspot.com.au/) Fees buy/sell with AUD 2-3%, trading 1%, Market orders 0.9%, withdraw cash Free, Deposit Poli-Free BPay-0.9% Cash-3%, Buy/Sell, Many coins

CoinLoft (https://www.coinloft.com.au/) Fees 5%, Buy, Coins - Bitcoin/Ether X

Independent Research (https://www.independentreserve.com/) Fees 0.5%, EFT above $100 free, Bitcoin, Ether deposit free, Poli-$3.30, Cash withdraw free, API X

Bittrex (https://bittrex.com/fees) - All trades have a 0.25% commission, has API X

Binance (https://www.binance.com/register.html) - not accepting new users at the moment.

Coinbase (https://support.coinbase.com/customer/en/portal/articles/2109597) - Does NOT have SELL feature - ie. can only buy. Buy using Credit/Debit card AU - 3.99% X

CoinTree (https://www.cointree.com.au/Home/FAQ#Buying+Altcoins) Fees Buying Bitcoins with Fiat 3% , Free for coins exchange

Changelly (https://changelly.com/faq) Fees 0.5%. Many coins exchange. "Additional fees will be charged, on top of the above Bitcoin / $ rate at checkout. Those fees are as follows: — Changelly.com 5%"

Shapeshift (https://www.shapeshift.io/#/inputs/1) - Pure Exchange ShapeShift does not charge any specific fees outside of the miner fee. Instead, we offer an exchange rate for each coin which changes every 30 seconds dependent on market conditions. We try to earn revenue by offering a profitable exchange rate, and typically we earn in the range of 0.5% (50 basis points). You receive exactly what the exchange rate shows, there is no additional fee for the service.

Australia's Cryptocurrency Exchange (https://acx.io/) - Fees 1% to withdraw cash to bank Coin/AUD buying more expensive than independent research

Warning on Fees: http://www.news.com.au/finance/money/investing/fees-fomo-and-fine-print-i-bought-300-worth-of-bitcoin-and-immediately-regretted-it/news-story/1f8c284441db52bf609383b362eaa2be

Public Key, Private Key, Wallet Addresses

ref: Bitcoin Public and Private Keys

ref:Can you explain how cryptocurrency keys/addresses work to a very confused crypto enthusiast?

Bitcoin or other coin wallets have a file called wallet.dat. In this file are the information including:

  • Private Key - This key should not be revealed to anyone. This key is related to the next two.
  • Public Key - This is the public facing part of the private/public key cryptography. This key can be send to others. This is 256bits long. This can be derived from the public key but not the other way.
  • Address - This is 160bits long and is the hash of the public key. This is also given out to others when you want them to send crypto funds to your account.

In some coin wallets, several wallet address can be generated. The one private key can let you generate many public keys and wallet addresses. However, if you change, lose, import another private key, then your original key may be lost. So all your coins are gone, unless you backed up the private key.

Mining Pool

Litecoin:

  • https://www.litecoinpool.org/pools - has a list of Litecoin mining pools
  • https://www.litecoinpool.org/ - is the biggest pool at the date of writing
  • https://www.litecoinpool.org/beginners-guide - Warns that mining Litecoin is NO LONGER profitable. "Litecoin mining can be profitable, but only under certain conditions. In the early days people could make a profit by mining with their CPUs and GPUs, but that is no more the case today. The introduction of specialized mining hardware (commonly referred to as ASICs), which can mine much faster and much more efficiently, has made finding blocks much harder with general-purpose hardware."

Miners

https://minergate.com/

Some profitable coins to mine: https://www.deepdotweb.com/2016/12/20/best-altcoins-mine-using-laptop-pc-2017/

https://www.cryptocompare.com

CryptoCurrency Market Capitalization A huge list of the alternative Cryptocoins available.

www.multipool.us This has a profitably table to guide people on which coin is currently profitable to mine.

how-to-mine-litecoin with GPUs - http://cryptocur.com/litecoin/litecoin-ltc-gpu-mining/

get-started-litecoin

How to Configure Cgminer for Litecoin & Bitcoin (Windows 8)

Exchange API

BTCMarket REST: https://api.btcmarkets.net/market/BTC/AUD/tick JSON: {"bestBid":22634.0,"bestAsk":22699.0,"lastPrice":22698.98,"currency":"AUD","instrument":"BTC","timestamp":1515417348,"volume24h":597.58343}

IndependentReserve REST: https://api.independentreserve.com/Public/GetMarketSummary?primaryCurrencyCode=xbt&secondaryCurrencyCode=usd JSON: {"DayHighestPrice":18279.05,"DayLowestPrice":16750.0,"DayAvgPrice":17558.3,"DayVolumeXbt":181.89188552,"DayVolumeXbtInSecondaryCurrrency":4.33637312,"CurrentLowestOfferPrice":17462.21,"CurrentHighestBidPrice":16686.6,"LastPrice":16750.0,"PrimaryCurrencyCode":"Xbt","SecondaryCurrencyCode":"Usd","CreatedTimestampUtc":"2018-01-08T13:26:50.1126024Z"}

Dogecoin

*** Versions of cgminer following version 3.72 do not support scrypt mining, and support for GPUs was removed in version 3.82. https://www.coindesk.com/information/how-to-mine-litecoin/

cgminer: https://github.com/ckolivas/cgminer/tree/v3.7.2 - original site

Wallet: DogecoinCore - see "DogecoinCore Wallet"

Pool:
- go to dogepool.com
teamdoge.com
doge.scryptools.com
p2pool: https://en.bitcoin.it/wiki/P2Pool

In the pool

  • create user/pwd/pin
  • create one worker for each computer used for mining
  • enter "Payment Address" obtained from Wallet
  • enter Minimum Doge for payment threshold

AMD:
- ATI drivers
- AMD SDK 2.9

doge-coinOnline Wallet– Direct Wallet Link
More Info –Tech Specs , Current Ranking
Exchanges – ( Bter my Personal Favorite)
Main Pool: http://q30.qhor.net:9555
Backup Pool: http://doge.scryptpool.us:22550

DogecoinCore Wallet

Local Dogecoin wallet - http://dogecointutorial.com/local-wallet.html

27Dec2017 - Dogecoin Full Wallet


Install the file: dogecoin-1.10.0-win64-setup-unsigned.exe
Syncing: after first installation, expect it to take a long time to Sync the entire blockchain.
Get Coins - get the Wallet's Payment Address by going to: File -> "Much receiving address..."
Send Coins - to send to others: File -> "Such sending address...."
Encryption - the wallet can be encrypted for more security: Settings -> "Encrypt Wallet"
Backup: File -> Backup Wallet (into a *.dat file). File
Restore: Go to the Dogecoin data folder (not the folder where Dogecoin is installed). By default the data folder is in Users//AppData/Roaming/. Then copy the backed up *.dat as "wallet.dat"

Bootstrap

  • the initial setup of Dogecoin wallet can take extremely long. Here the Bootstrap method is used.
  • Run the Dogecoin, wait until it is syncing, then close the app.
  • Download the blockchain from https://bootstrap.chain.so/
  • Save it as "bootstrap.dat" to the data directory of DogecoinWallet, by default it is Users\AppData\Roaming\DogeCoin
  • Run the the DogecoinWallet app. It will sync using the bootstrap file, and when done, it will rename it as bootstrap.dat.old.

Errors

  • "error loading block database" or "Error opening block database" Ensure Firewall off (otherwise Access is Denied error), open CMD as Administrator, cd to Dogecoin installation, run "dogecoin..-qt.exe --reindex"

Console: Getting Public, Private and Address

See Public Key, Private Key, Wallet Addresses - for explanation on the differences.

This section shows all three public, private keys and wallet addresses from the Dogecoin Core Wallet buildin console.

  1. Open Dogecoin Core Wallet
  2. Click on File -> Much Receiving Address
  3. In the new window that popped up, there should be at least one line of Label - Addresses.
  4. Put the mouse over one of the Addresses values, and right click and choose 'Copy Address'.
  5. The address that is copied in the previous step is the Wallet Address
  6. Click on 'help' in the menu bar (top right)
  7. Click on 'debug window'
  8. Select the 'console' tab
  9. At the bottom, type: walletpassphrase "your walletpassphrase here" 600
    where 600 is the seconds before timeout. The walletpassphrase is the long list of words when you first encrypted the wallet.
  10. To get the Private Key type: dumpprivkey [Wallet Address] this will return the private key, you can copy it now; ensure you clear your clipboard/history afterwards To finish off, type: walletlock
  11. ignore these steps if your wallet isn't encrypted.
  12. To get the Public Key, type: validateaddress [Wallet Address] This will not only output the public key, but also the scriptPubKey and isCompressed. The isCompressed tells whether the public key is compressed or not.

Musiccoin

Exchange: Bittrex, Cryptopia

Stats:
https://whattomine.com/coins/178-music-ethash https://coinmarketcap.com/currencies/musicoin/

Mining:
https://www.google.com.au/search?q=how+to+mine+musiccoin&oq=how+to+mine+musiccoin&aqs=chrome..69i57.5648j0j4&sourceid=chrome&ie=UTF-8

ethminer:
https://github.com/ethereum-mining/ethminer/releases

https://steemit.com/cryptocurrency/@lifebyadam/how-to-mine-musicoin-from-home-using-your-amd-or-nvidia-gpu

  • says ethminer has better hash rate than claymore
  • suggests "mining pool hub"
  • In Mining pool
    • create account
    • create worker, with password
    • worker configuration, use the worker and password just created
  • In Ethminer:
    • ethminer -G -S <pool info:port> -O worker:passwd --opencl-devices 1
  • Non-Pool Mining with GPU:


https://steemit.com/mining/@cryptomkd/how-to-mine-musicoin-mc-on-pool
https://musicoin.miningpoolhub.com/
https://github.com/Musicoin/go-musicoin/wiki/Start-a-miner ****
https://blockonomi.com/mine-musicoin/
https://github.com/Genoil

Wallet: https://github.com/Musicoin/desktop

  • Data directory is default at c:\users\\AppData\Roaming\Musicoin. To change directory:
    • Close the Musicoin Wallet
    • Copy the c:\users\\AppData\Roaming\Musicoin folder to the destination XXX, then rename the sources as MusicoinOLD.
    • Open CMD as "Run as Administrator"
    • make symbolic link: mklink /D c:\users\\AppData\Roaming\Musicoin XXX
    • Open Musicoin Wallet to test. If OK, then delete MusicoinOLD.

Source code:
https://github.com/Musicoin/go-musicoin
GMC v2.5.1 stable - https://github.com/Musicoin/go-musicoin/releases - get gmc-windows-4.0-amd64.exe
https://github.com/Musicoin/go-musicoin

Ethereum

Pool: https://ethermine.org/

Ethereum Contracts


https://medium.com/@ConsenSys/a-101-noob-intro-to-programming-smart-contracts-on-ethereum-695d15c1dab4
https://medium.com/crypto-currently/build-your-first-smart-contract-fc36a8ff50ca
https://www.ethereum.org/greeter

GPUS

http://www.legitreviews.com/best-gpu-ethereum-mining-nvidia-amd-tested_195229

Checking GPU Load

Using GPU-Z - this gives some indication of how much the GPU is being used, whether it is being highly stressed or not. There is not one specific indicator, but from experience, you will get to know which indicator to look for. Watch this before and during the running of any crypto miner.

The GPU-Z could be quite tricky to use. Feel free to follow these instructions:

  1. Google GPU-Z and download
  2. Save as onto Downloads folder
  3. Unzip as necessary
  4. Copy the GPU-Z.2.5.0.exe onto the Windows Desktop
  5. Run as Administrator from the icon on the Windows Desktop.

Warning

  1. This does NOT need to be installed.
  2. If it is run from the Downloads folder, there is an error like "system cannot install driver" or something. But it works if copied onto the Desktop.

References:

"How to Buy Bitcoin" - Money Magazine, Oct 2017.